GH-HT2 Set pull tab G 2xM10 340x60x3,0mm, foot angle with rib 103x75x60x3,0
ETA 10 0010 Made in Germany  

GH HT tension tie, 2-piece

Preassembly during wall production

The fishplates are pre-installed during production of the walls and the wall is completely closed. For flush installation of the wall sheathing, we recommend a 3.0 mm deep routing in the wall plate.

Final installation on the construction site

The base angle connector is mounted flush on the floor slab on the construction site. Unevenness in the floor slab of up to 30 mm is quickly and easily adjusted for by the serrations and the connector is fixed using a nut M10.

Fishplate installation options

Left-hand or right-hand type

The fishplate is mounted on the left or right-hand side of the post using GH connector nails or GH screws. Only one routing of 3.0 mm in the wall plate is recommended to ensure absolute wind-tightness.

Straight type

The fishplate is mounted on the front of the post. A recess of at least 5.0 mm is recommended in the post + wall plate or in the OSB board. Alternatively, the fishplate can also be mounted via the intermediate layer in the post.

The fishplates are pre-installed during... show more
Order no.: 11090352 EAN: 4019346032763
TopLine & KonstruLine

 Are you a customer or a new customer? (Specialist trade) 
 For more information about our products, orders, invoices and promotions, log in to our new shop system (account above). 

 

Material: S 355 MC
Fuss Höhe: 103
width: 60
height: 340
length: 73
thickness: 3,0
Anzahl Ø5: 20
ETA-10/0010: ETA-10/0010
KonstruLine: KonstruLine
TopLine: TopLine

equipment

ETA 10 0010 Made in Germany  

GH HT tension tie, 2-piece

Preassembly during wall production

The fishplates are pre-installed during production of the walls and the wall is completely closed. For flush installation of the wall sheathing, we recommend a 3.0 mm deep routing in the wall plate.

Final installation on the construction site

The base angle connector is mounted flush on the floor slab on the construction site. Unevenness in the floor slab of up to 30 mm is quickly and easily adjusted for by the serrations and the connector is fixed using a nut M10.

Fishplate installation options

Left-hand or right-hand type

The fishplate is mounted on the left or right-hand side of the post using GH connector nails or GH screws. Only one routing of 3.0 mm in the wall plate is recommended to ensure absolute wind-tightness.

Straight type

The fishplate is mounted on the front of the post. A recess of at least 5.0 mm is recommended in the post + wall plate or in the OSB board. Alternatively, the fishplate can also be mounted via the intermediate layer in the post.

Your recently viewed items

HT2 Tie Rods-Set
HT2 Tie Rods-Set